Bueno este es mi xorg.conf de elive beta 0.4

y tenemos un gran pob.. donde diablos cambio los htz hor-ver?

====

Section “ServerLayout”
Identifier     “XFree86 Configured”
Screen      0  “Screen0″ 0 0
InputDevice    “Keyboard0″ “CoreKeyboard”
# PS/2 Mouse using /dev/input/mice in Kernel 2.6
# Serial Mouse not detected
InputDevice    “USB Mouse” “CorePointer”
EndSection

Section “ServerFlags”
Option “AllowMouseOpenFail”  “true”

EndSection

Section “Files”
RgbPath      “/usr/X11R6/lib/X11/rgb”
ModulePath   “/usr/X11R6/lib/modules”
FontPath     “/usr/X11R6/lib/X11/fonts/misc:unscaled”
FontPath     “/usr/X11R6/lib/X11/fonts/misc”
FontPath     “/usr/X11R6/lib/X11/fonts/75dpi:unscaled”
FontPath     “/usr/X11R6/lib/X11/fonts/75dpi”
FontPath     “/usr/X11R6/lib/X11/fonts/100dpi:unscaled”
FontPath     “/usr/X11R6/lib/X11/fonts/100dpi”
FontPath     “/usr/X11R6/lib/X11/fonts/Speedo”
FontPath     “/usr/X11R6/lib/X11/fonts/PEX”
# Additional fonts: Locale, Gimp, TTF…
FontPath     “/usr/X11R6/lib/X11/fonts/cyrillic”
#    FontPath     “/usr/X11R6/lib/X11/fonts/latin2/75dpi”
#    FontPath     “/usr/X11R6/lib/X11/fonts/latin2/100dpi”
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath     “/usr/X11R6/lib/X11/fonts/Type1″
FontPath     “/usr/share/fonts/ttf/western”
FontPath     “/usr/share/fonts/ttf/decoratives”
FontPath     “/usr/share/fonts/truetype”
FontPath     “/usr/share/fonts/truetype/openoffice”
FontPath     “/usr/share/fonts/truetype/ttf-bitstream-vera”
FontPath     “/usr/share/fonts/latex-ttf-fonts”
# These should no longer be used
#    FontPath     “/usr/X11R6/lib/X11/fonts/defoma/CID”
#    FontPath     “/usr/X11R6/lib/X11/fonts/defoma/TrueType”

# Used when x-ttcidfont-conf is installed
FontPath     “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType”
FontPath     “/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID”

EndSection

Section “Module”
Load  “ddc”  # ddc probing of monitor
Load  “GLcore”
Load  “dbe”
Load  “dri”
Load  “extmod”
Load  “glx”
Load  “bitmap” # bitmap-fonts
Load  “speedo”
Load  “type1″
Load  “freetype”
Load  “record”
EndSection

Section “InputDevice”
Identifier  “Keyboard0″
Driver      “keyboard”
Option      “CoreKeyboard”
Option “XkbRules” “xfree86″
Option “XkbModel” “pc105″
Option “XkbLayout” “us”

Option “XkbOptions” “grp:shift_toggle”
EndSection

Section “InputDevice”
Identifier  “Serial Mouse”
Driver      “mouse”
Option      “Protocol” “Microsoft”
Option      “Device” “/dev/ttyS0″
Option      “Emulate3Buttons” “true”
Option      “Emulate3Timeout” “70″
Option        “SendCoreEvents”  “true”
EndSection

Section “InputDevice”
Identifier  “PS/2 Mouse”
Driver      “mouse”
Option      “Protocol” “auto”
Option          “ZAxisMapping”          “4 5″
Option      “Device” “/dev/psaux”
Option      “Emulate3Buttons” “true”
Option      “Emulate3Timeout” “70″
Option        “SendCoreEvents”  “true”
EndSection

Section “InputDevice”
Identifier      “USB Mouse”
Driver          “mouse”
Option          “Device”                “/dev/input/mice”
Option        “SendCoreEvents”    “true”
Option          “Protocol”              “IMPS/2″
Option          “ZAxisMapping”          “4 5″
Option          “Buttons”               “5″
EndSection

# Auto-generated by KNOPPIX mkxf86config

# EDID version 1 revision 1
Section “Monitor”
Identifier    “Monitor0″
Option    “DPMS”    “true”
VendorName “CPQ”
ModelName “CPQ:0130″
Mode     “640×350″
DotClock    25.170000
HTimings    640 656 752 800
VTimings    350 387 389 449
Flags    “-HSync” “+VSync”
EndMode
Mode     “640×480″
DotClock    36.000000
HTimings    640 696 752 832
VTimings    480 481 484 509
Flags    “-HSync” “-VSync”
EndMode
Mode     “800×600″
DotClock    56.250000
HTimings    800 832 896 1048
VTimings    600 601 604 631
Flags    “+HSync” “+VSync”
EndMode
Mode     “1024×768″
DotClock    56.250000
HTimings    800 832 896 1048
VTimings    600 601 604 631
Flags    “+HSync” “+VSync”
EndMode
EndSection

Section “Device”
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option     “sw_cursor”
#Option     “hw_cursor”
#Option     “NoAccel”
#Option     “ShowCache”
#Option     “ShadowFB”
#Option     “UseFBDev”
#Option     “Rotate”
Identifier  “Card0″
# The following line is auto-generated by KNOPPIX mkxf86config
Driver    “nvidia”
VendorName  “All”
BoardName   “All”
#    BusID       “PCI:1:0:0″
EndSection

Section “Screen”
Identifier “Screen0″
Device     “Card0″
Monitor    “Monitor0″
DefaultDepth    24
SubSection “Display”
Depth     1
Modes     ”1024×768″ “800×600″ “640×480″
EndSubSection
SubSection “Display”
Depth     4
Modes     ”1024×768″ “800×600″ “640×480″
EndSubSection
SubSection “Display”
Depth     8
Modes     ”1024×768″ “800×600″ “640×480″
EndSubSection
SubSection “Display”
Depth     15
Modes     ”1024×768″ “800×600″ “640×480″
EndSubSection
SubSection “Display”
Depth     16
Modes     ”1024×768″ “800×600″ “640×480″
EndSubSection
SubSection “Display”
Depth     24
Modes     ”1024×768″ “800×600″ “640×480″
EndSubSection
SubSection “Display”
Depth     32
Modes     ”1024×768″ “800×600″ “640×480″
EndSubSection
EndSection

Section “DRI”
Mode 0666
EndSection